MOBILE

• Mobile module4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
• StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
• SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
• USSDSupports sending and reading Unstructured Supplementary Service Data messages
• Black/White listOperator black/white list (by country or separate operators)
• Multiple PDNPossibility to use different PDNs for multiple network access and services
• Band managementBand lock, Used band status display
• APNAuto APN
• BridgeDirect connection (bridge) between mobile ISP and device on LAN
• PassthroughRouter assigns its mobile WAN IP address to another device on LAN

ETHERNET

• ETH1 x ETH port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

NETWORK

• RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
• Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
• VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
• FirewallPort forward, traffic rules, custom rules
• Firewall status pageView all your Firewall statistics, rules, and rule counters
• Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
• Network topologyVisual representation of your network, showing which devices are connected to which other devices
• DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
• QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNSSupported >25 service providers, others can be configured manually
• Network backupMobile, VRRP, Wired options, each of which can be used as an automatic Failover
• Load balancingBalance Internet traffic over multiple WAN connections
• HotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
• SSHFSPossibility to mount remote file system via SSH protocol

SECURITY

• AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator
• FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLANPort and tag-based VLAN separation
• Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
• WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
• Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
• OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
• IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
• GREGRE tunnel, GRE tunnel over IPsec support
• PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
• StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
• DMVPNMethod of building scalable IPsec VPNs
• SSTPSSTP client instance support
• ZeroTierZeroTier VPN client support
• WireGuardWireGuard VPN client and server support
• TincTinc offers encryption, authentication and compression in it's tunnels. Client and server support.

OPC UA

• Supported modesClient, Server (planned)
• Supported connection typesTCP

MODBUS

• Supported modesServer, Client
• Supported connection typesTCP
• Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
• Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

• ProtocolHTTP(S), MQTT, Azure MQTT
• Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server

MQTT GATEWAY

• Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

• Supported modesStation, Outstation
• Supported connectionTCP

DLMS

• DLMS SupportDLMS - standard protocol for utility meter data exchange
• Supported modesClient
• Supported connection typesTCP

API

• Teltonika Networks Web API (beta) supportExpand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

MONITORING & MANAGEMENT

• WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
• FOTAFirmware update from server, automatic notification
• SSHSSH (v1, v2)
• SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
• CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
• TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
• MQTTMQTT Broker, MQTT publisher
• SNMPSNMP (v1, v2, v3), SNMP Trap
• JSON-RPCManagement API over HTTP/HTTPS
• RMSTeltonika Remote Management System (RMS)

IOT PLATFORMS

• Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
• ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
• CumulocityAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
• Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

• CPUQualcomm, 1.2 Ghz, ARM Cortex-A7
• RAM128 MB
• FLASH storage256 MB

FIRMWARE / CONFIGURATION

• WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
• FOTAUpdate FW
• RMSUpdate FW/configuration for multiple devices at once
• Keep settingsUpdate FW without losing current configuration
• Factory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

FIRMWARE CUSTOMISATION

• Operating systemRutOS (OpenWrt based Linux OS)
• Supported languagesBusybox shell, Lua, C, C++
• Development toolsSDK package with build environment provided
• GPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs

INPUT / OUTPUT

• Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
• Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
• EventsEmail, RMS, SMS
• I/O jugglerAllows to set certain I/O conditions to initiate event

POWER

• Connector1 x 4-pin industrial DC power socket1 x USB Type-C
• Input voltage range4-pin: 9 - 30 VDC, overvoltage protection, reverse polarity protection, surge protection >35 VDC 10us maxUSB Type-C: 5 VDC
• PoE (passive)Possibility to power up through ETH port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
• Power consumptionIdle: < 0.25 W, Max: < 3.3 W

PHYSICAL INTERFACES

• Ethernet1 x RJ45 port, 10/100/1000 Mbps
• I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
• Status LEDs2 x connection type status LEDs, 3 x connection strength LEDs, 2 x ETH status LEDs, 1 x Power LED
• SIM1 x Internal SIM slot (Mini SIM – 2FF), 1.8 V/3 V, eSIM (Optional)
• Power1 x 4-pin power connector1 x USB Type-C
• Antennas2 x SMA for Mobile
• ResetReboot/User default reset/Factory reset button
• Other1 x Virtual network interface via USB Type-C (For power and network data)

PHYSICAL SPECIFICATION

• Casing materialAnodized aluminum housing and panels
• Dimensions (W x H x D)83 x 25 x 74.2 mm
• Weight172 g
• Mounting optionsDIN rail, wall mount, flat surface (all require additional kit)

OPERATING ENVIRONMENT

• Operating temperature-40 °C to 75 °C
• Operating humidity10% to 90% non-condensing
• Ingress Protection RatingIP30